How To Use A Rug Doctor Carpet Machine - Ace Hardware

 

Setting Up The Rug Doctor To Clean Your Carpets

The Rug Doctor is obviously a popular piece of equipment for rug cleaning DIY'ers and those wanting to save a bit of money over professional carpet cleaning services. Does the Rug Doctor work? Yes, it absolutely does! The problems with the Rug Doctor surface when the people who rent it either have a poor understanding of the machine or limited experience with cleaning carpets all together which often leads to a poorer than expected result after they are finished.

Today, I am going to explain the proper way to set up a rug doctor so the next time you get one home, you will walk away completely satisfied with the job it does on your carpets. Let's get started!

1. When you get the Rug Doctor Home, unlock the handle and swing it out and up into the upright position. There are 4 to choose from. Choose whichever one seems like it will be the most comfortable for an extended day of cleaning (we are speaking of ergonomics here!)

2. When operating, the 2 needle jets on the bottom of the machine deliver a measured amount of cleaner through the nozzles and onto the rug. The row of bi-directional brushes operate at 3200 cycles per minute allowing every side and angle of the carpet fiber to get scrubbed. A vacuum extracts 80% of the cleaning solution from the carpet right after use. The Rug Doctor is fairly bulky, therefore you will need to remove all of the furniture from the room before starting the machine.

3. Give the carpet a thorough vacuuming to remove and surface dirt and debris. This will allow the deep cleaning of the Rug Doctor to be more effective.

4. To add the Rug Doctor cleaning solution to the machine, fill a bucket with approximately 8 liters of warm tap water. Shake the Rug Doctor solution thoroughly and then add 150 ml to the bucket of warm water. This will be enough solution to clean one full sized room.

5. On the Rug Doctor, there are 2 compartments for fluids, one at the bottom (this is the compartment to put the clean solution) and the upper tank, which is where the cleaner goes after it is used and sucked back up by the machine. In order

to reach the red base tank to fill it with clean solution, you will need to remove the upper recovery tank.

To remove the recovery tank, simply un-clip the retaining handle from the top of the unit, and fold it down and out of the way. Once un-clipped, the recovery tank will lift easily out of the way giving access to the lower tank. Now, you can pour your bucket of clean solution into the lower tank. Once your solution is in the lower tank, replace the recovery tank and re-clip the handle to hold the components in place.

6. The last step needed for your Rug Doctor setup is to look on the top of the machine. That is where you will find a white rocker switch. One setting on the switch is for 'hand tool'. The other side of the switch is for 'carpet cleaning'. Make sure the switch is set to 'carpet cleaning' in order to commence the job.

If the switch is set to 'hand tool' it will spray a continuous steam of cleaning solution onto the carpet soaking it far too much (as well as getting your carpets far too wet) to be cleaned properly. Just make sure before you start cleaning to have that switch set properly.

That concludes the simple steps needed to be taken in order to set up your Rug Doctor for proper carpet cleaning. Later, I will be examining the proper steps to take to do the cleaning itself. Stay tuned!

Article written by Elizabeth Stanford

Article Source: https://EzineArticles.com/expert/Elizabeth_Stanford/1749814

SHOCKING SATISFYING CARPET CLEANING / RUG DOCTOR CARPET CLEANER REVIEW/ WATCH STAINS DISAPPEAR #AD​.

 

Reasons the Rug Doctor Carpet Cleaner is the Carpet Cleaning King

Rug Doctors have been around a long, long time. They were the original method people used when they wanted to clean their carpets. Amazingly, even with all the new innovations in technology, they are still going strong, and you can still find them at many supermarkets and rental stores. In fact, in 2009 the company issued a statement that they had had the highest number of rentals in company history during the past year. While other companies in the rug cleaning sector were faced with falling rentals and sales, Rug Doctor Carpet Cleaner continued going strong. What is it about them that makes them so much more popular than the competition?

There are several reasons why so many people turn to the convenience of a Rug Doctor. One is that they are so readily available. You don't have to look high and low to find one when you're ready to clean your carpets, because they are available in so many places. Even the smaller town I used to live in had four or five places where you could rent one.

Another reason so many people choose Rug Doctor is because they do such a good job. Online reviewers rave about what a tremendous job the machines have done. They say that they were amazed when these compact cleaners actually did a better job than professionals. In addition, reviewers will tell you that they were attracted by the low cost to rent the machine as opposed to what they had to pay for other options and that Rug Doctors are very simple to use and to maneuver. One reviewer stated that she was 83 and felt that if she could do it, anyone could.

Although there are many different types of carpet cleaning machines available for sale, none can measure up to the Rug Doctor. Maybe you never realized that you can also purchase a Rug Doctor and have one in your home. I'll warn you that these heavy-duty machines do not come cheap; however, you get what you pay for. And you always have the option of renting a cleaner which will only set you back between $20 and $30 plus the cost of the cleaning product you use. When you consider what professional carpet cleaning company is going to charge you, Rug Doctors are truly a bargain.

Keeping your carpets clean is the only way to ensure they stay looking and feeling fresh. 

Article written by Christopher W Smith

Article Source: https://EzineArticles.com/expert/Christopher_W_Smith/13035

How to clean carpet: 9 easy ways to quickly remove carpet stains - Lifehacks

 

Things That You Need to Know About Carpet Cleaning

Carpets are indeed one of the most important things that we can find in our homes. These can make or break the look the whole room. This is why most people always make it a point to have carpets in their homes so that their homes will look as elegant and as nice as they should be. This is true only under one condition. Carpets usually look their best especially when they are still clean and new. A newly bought or installed carpet would always pull the look of the simplest room there is. Most carpet owners do make it a point to maintain the cleanliness of their carpets.

We all know how carpets attract dirt so much. Even if we try to take care and keep our carpets clean, there will always be a stain that will begin to pop out of it. Once a carpet looks very dirty, this can now destroy the look of the whole room. This can now leave the room very untidy and not well cleaned. This is the primary reason why you should always maintain the cleanliness of your carpets all the time. Whether you do this on your own or you hire cleaning services to do so, you need to make sure that your carpets look as new as they should.

One equipment that has really made carpet cleaning such an easier but effective cleaning job is a vacuum cleaner. These are tools or equipment which are used to suck out dirt which are trapped within the fibers of the carpet. This is very effective when you want to remove the solid particles, allergens and the dust which have stayed in the carpet. Although cleaning the carpet thoroughly, removing the stains do need extensive cleaning procedures in order to remove them in the best way possible.

As time passes by, the popularity of carpets in homes have changed the way that people are cleaning their carpets. In the past, carpet cleaning only meant having to use baking soda paste scrub in order to remove whatever is trapped in the carpet fibers. As time passed by, people have devised so many cleaning methods in order to ensure cleaner carpets. There are so many cleaning chemicals that can be bought so that people will not have a hard time cleaning their most prized possession. There are products which remove stains such as carpet shampoo, deep steam, carbonated water, carpet powders and protectors. All of these products claim to remove the stains and soils that have accumulated in the carpet for some time now.

There are basically different phases that need to be completed when cleaning a carpet. Of course, this is a very delicate thing in your household which needs to be cleaned properly. Without following these phases, you are just risking the worsening of the condition of your carpets so you should always keep these in mind and you are on your way in maintaining the best conditions for your precious carpet.

The first phase of carpet cleaning involves the pretreatment of your carpet. This may seem to be an unnecessary carpet cleaning step, but in reality, this is the most important cleaning step. This prepares and conditions your carpet so that it will be cleaned easily. What is done in this step is that the carpet is spayed or sprinkled with a particular solution that help in cleaning of the carpet. It basically lets the solid particles, soils, dirt and dust which are trapped inside the carpets to resurface and lift up. This will now make it easier for the particles to be cleaned.

The next phase would involve the cleaning process itself. The removal of the resurfaced dirt will be done here. As mentioned, there are different ways of cleaning the carpets but just so you know, there are just three major cleaning procedures done when it comes to carpet cleaning. Carpet cleaning would involve hot water extraction, dry extraction and cold water extraction. These methods usually work for a certain type of carpet cleaning job. It is best to research first on which is the suitable cleaning method to do so that cleaning will be done in the best way possible without leaving any dirt behind.

The last phase basically neutralizes the carpet leaving it to be as presentable as it must be. Cleaning will leave no dirt behind but instead remove cleaning residue. Carpet cleaning, involves methods mentioned, and these usually leaves some of the cleaning materials in the carpet. This can actually do more damage and even leave the carpets looking dirtier. This is why this last step should never be neglected and always be done to ensure that the carpet is left clean as it should be, without leaving behind particles. This even makes the carpet feel as soft and looking as new as it was.

Whether you would have your carpets cleaned by professionals or by yourself, you should be knowledgeable when it comes to carpet cleaning. There are now green cleaning products that you can use for your carpet cleaning job. If you want to clean the right way, then might as well check out these cleaning materials each time you use them for cleaning. The environment will be thankful or taking part in trying to protect it from the harm that the people has caused. You can now clean without that guilty feeling of doing so.

These are the things that you have to know when it comes to carpet cleaning. Being that carpets are very precious things, we should never neglect them. Cleaning them is a must which is why we should always make it a point to have them as clean as possible. Remember, a clean carpet will always make any room look as nice as it should be. This is why carpets are meant to be cleaned and left to look as new as they are. Check out the ways in which you can clean your carpets and never regret the decision that you have made.

Article written by John F Smith

Article Source: https://EzineArticles.com/expert/John_F_Smith/171284
Article Source: http://EzineArticles.com/3007215